Targed Plât Titaniwm
Targed Titaniwm:Rydym yn defnyddio biled aloi titaniwm, neu blât i'w durnio i mewn i dargedau titaniwm. Mae cynnwys amhuredd titaniwm pur diwydiannol yn fwy na thitaniwm pur cemegol, felly mae ei gryfder a'i galedwch ychydig yn uwch.Mae ei briodweddau mecanyddol a chemegol yn debyg i rai dur di-staen.O'i gymharu ag aloi titaniwm, mae gan ditaniwm pur gryfder gwell ac mae ganddo ymwrthedd ocsideiddio gwell.Mae'n well na dur di-staen austenitig, ond mae ei wrthwynebiad gwres yn wael.Cynnydd TA1, TA2, TA3 mewn cynnwys amhuredd, cryfder mecanyddol a chynnydd caledwch mewn trefn, ond mae caledwch plastig yn lleihau mewn trefn.
• Targed Platiau Titaniwm: Gradd 1, Gradd 2, Gradd 5, Gradd 5, Gradd 7, Gradd 9, Gradd 11, Gradd 12, Gradd 16, Gradd 23 ac ati
• Mathau:Targed Rownd, Targed Pibell, Plât Target.ect
• Dimensiwn: 60/80/120(W) × 6/8/12(T) × 519/525/620(L) & 60-800(W) × 6-40(T) × 600-2000(L)Wedi'i addasu
•Swyneb:arwyneb llachar neu arwyneb piclo Asid
• Ceisiadau: a ddefnyddir mewn dyfeisiau gwahanu lled-ddargludyddion, arddangosfeydd panel fflat, ffilmiau electrod storio, cotio sputtering, cotio wyneb workpiece, diwydiant cotio gwydr, ac ati.
| Aloi Titaniwm Deunydd Enw Cyffredin | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0.20Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
♦ Cyfansoddiad Cemegol aloion Titaniwm ♦
| Gradd | Cyfansoddiad cemegol, pwysau y cant (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Elfennau Eraill Max.yr un | Elfennau Eraill Max.cyfanswm | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.56.75 | 3.5 4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12 0.25 | - | 0.12 0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 3.5 | 2.0 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04 0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0. 125 | 0.25 | 5.5 6.5 | 3.5 4.5 | - | - | - | - | 0.1 | 0.1 |
♦Aloi TitanwmPriodweddau Corfforol ♦
| Gradd | Priodweddau ffisegol | |||||
| Cryfder tynnol Minnau | Cryfder cynnyrch Isafswm (0.2%, gwrthbwyso) | Elongation mewn 4D Isafswm (%) | Lleihau Ardal Isafswm (%) | |||
| ksi | MPa | ksi | MPa | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
| Gr5 | 130 | 895 | 120 | 828. llariaidd | 10 | 25 |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr23 | 120 | 828. llariaidd | 110 | 759 | 10 | 15 |
